HP (Hewlett-Packard) D8C11UTABA ユーザーズマニュアル
3.
Lift the power cable assembly from the computer (2).
Reverse this procedure to install the power cable.
Latch assembly
NOTE:
The Latch Kit includes the latch, bracket, two screws, and spring.
Description
Spare part number
Latch Kit
684635-001
Before removing the latch assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the following components:
a.
Bottom door (see
b.
Optical drive (see
)
c.
WLAN/Bluetooth module (see
)
d.
e.
Keyboard (see
)
f.
Top cover (see
110 Chapter 4 Removal and replacement procedures