HP (Hewlett-Packard) ze4100 ユーザーズマニュアル

ページ / 126
 
Removing the Wireless LAN Mini-PCI Card 
(User-Replaceable) 
Certain notebooks include a wireless LAN mini-PCI card under the mini-PCI door on the bottom of the 
notebook. 
Caution 
Handle the Mini-PCI card only by its edges and provide proper grounding, or you might damage 
the card through electrostatic discharge. 
 
Required Equipment 
•  #0 Phillips screwdriver. 
Removal Procedure 
1. 
2. 
Unplug the AC adapter, if present, and then remove the battery. 
On the bottom of the notebook, loosen the captive screws holding the Mini-PCI door, and then 
remove the door. 
 
Caution 
Be careful when connecting and disconnecting the antenna cables from the mini-PCI card. 
Damaged cables or connectors can degrade notebook performance. 
 
3. 
4. 
5. 
Disconnect the two antenna cables from the mini-PCI card. 
Press outward on the latches at the sides of the mini-PCI card to release it (the mini-PCI card 
pops up). 
Carefully pull the mini-PCI card out of the connector. 
 
 
 
Figure 2-4. Removing the Mini-PCI Card 
Reassembly Notes 
•  Carefully press the mini-PCI card into the connector at an angle of about 30°, until it is fully 
inserted. Then press down on both sides of the mini-PCI card until the latches snap closed. 
2-6 
Removal and Replacement 
Service Manual