HP (Hewlett-Packard) ze4100 ユーザーズマニュアル

 

Service Manual 

Removal and Replacement 

2-9 

(User-Replaceable) 

1 Phillips screwdriver 

NOTE: If you are installing a new hard disk drive, load the factory software and operating system on the 
drive as described in “Recovering the Factory Software”, as shown on the next page. 

 

1. Unplug the AC adapter, if present, and then remove the battery. 

2. On the bottom of the notebook, remove the hard disk drive rubber screw plugs and 

M2.5×6.0mm screws. (The number of plugs and screws varies by model.) 

3. Carefully pull the hard disk drive out of the notebook.