HP (Hewlett-Packard) ze4100 ユーザーズマニュアル

ページ / 153
 
Service Manual 
Removal and Replacement 
2-63 
Removing Other Components
 
(Authorized Service Providers Only) 
Required Equipment 
•  0 and 1 Phillips screwdrivers 
•  Small flat-blade screwdriver 
Removal Procedure 
1. Unplug the AC adapter, if present, and then remove the battery. 
2. Remove the assemblies, and then follow the additional steps listed in the table below. 
Table 2-5. Removing Components 
 
Component 
Removal Procedure 
Additional Steps 
Battery, CMOS  
Keyboard cover(page 2-13) 
Switchboard PCA(page 2-19) 
Reassembly Notes: After replacing the CMOS 
battery, set the correct time and date using the 
BIOS Setup utility or Date/Time in the Control 
Panel. 
Case, bottom 
 
Case, top 
 
CD/DVD drive 
 
CPU module 
 
Display assembly 
 
Doors, PCMCIA 
Keyboard cover(page 2-13) 
Switchboard PCA(page 2-19) 
Floppy drive