HP (Hewlett-Packard) ZT1000 ユーザーズマニュアル

44 

Removing and Replacing Parts 

zt1000/xz300 and xt1500 Series 

 

 

Troubleshooting and Self-Repair Guide 

Cover, keyboard (with LED lens) 

F3398-60917 

 

•  #0 Phillips screwdriver. 
•  Small flat-blade screwdriver. 

1.  Unplug the AC adapter, if present, and remove the battery. 

2.  Close the notebook’s display, and remove both screws from the backs of the hinge covers. 

 

3. Open the display so that it lays flat. 

4. Use the flat-blade screwdriver to carefully pry up the right end of the keyboard cover just above 

the Page Up key, then lift the end until the cover unsnaps. 

 

When removing the keyboard cover, be careful not to pull on the cable that connects the 
keyboard cover to the notebook. 

 

5.  Carefully lift the cover to unsnap the latches above the center One-Touch button and the F1 key, 

then lift the cover about an inch off of the notebook. 

6. Disconnect the keyboard cover switch cable from the motherboard, and remove the cover from 

the notebook. 

Screws, 
M2.5x4mm (2)