HP (Hewlett-Packard) QT332US ユーザーズマニュアル

Power button board

652515-001

Before removing the power button board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the service access cover (see 

Remove the optical drive (see 

) or upgrade bay hard drive (see 

).

Remove the keyboard (see 

Remove the top cover (see 

).

Remove the power button board:

Position the top cover upside down with the front toward you.

Remove the two Phillips M2.5x3.0 screws (1) that secure the power button board to the top
cover.

Remove the tape (2) that secures the power button board cable to the top cover.

Slide the power button board cable (3) out from the clips in the top cover to remove it.

Component replacement procedures

93