HP (Hewlett-Packard) 5102 ユーザーズマニュアル

ページ / 147
Universal Serial Bus
Pin
Signal
1
+5 VDC
2
Data -
3
Data +
4
Ground
The USB+ power port on the right side of the computer powers HP USB external devices (see 
). The port provides a minimum of 4.75 V measpin on the ured at the USB
connector under a continuous 2.5-A load. The port is capable of 3 A for <1 ms.
The USB + power port is identified by a 3.5 mm diameter key jack, which supports the pin on the USB
+ power cable for HP external devices.
NOTE:
The standard USB ports on the left side on the computer provide a minimum of 4.75 V under
a continuous 0.5-A load only.
126 Chapter 8   Connector pin assignments