HP (Hewlett-Packard) 5102 ユーザーズマニュアル

ページ / 147
Memory module
Description
Spare part number
Memory module, PC2-6400, shared, 2048-MB
NOTE:
Not supported by computers with Windows® XP Home SP3, or with Windows 7 Starter
installed.
598858-001
Memory module, PC2-6400, shared, 1024-MB
598861-001
Before removing the memory module, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see 
5.
If your device has WWAN capability, remove the SIM (see 
).
Remove the memory module:
1.
With the battery removed, slide the battery release latch in front of the memory module
compartment (1) to release the memory module cover from the computer.
2.
Swing the cover up and away from the outside of the computer to remove the cover (2).
3.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The module tilts up.)
Component replacement procedures
43