HP (Hewlett-Packard) 5102 ユーザーズマニュアル
Mass storage devices
NOTE:
Each hard drive spare part kit and solid state drive spare part kit includes a bracket and screws.
Description
Spare part number
Hard drive, 320-GB, 7200-RPM, for use with WWAN option
593643-001
Hard drive, 320-GB, 7200-RPM, SATA
577974-001
Hard drive, 250-GB, 7200-RPM, for use with WWAN option
593642-001
Hard drive, 250-GB, 7200-RPM, SATA
577973-001
Hard drive, 160-GB, 7200-RPM, for use with WWAN option
593641-001
Hard drive, 160-GB, 7200-RPM, SATA
577972-001
Solid state drive, 128-GB, SATA
606971-001
Solid state drive, 80-GB, SATA
583004-001
Before removing the hard drive or solid state drive, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
then unplugging the AC adapter from the device.
4.
Remove the battery (see
5.
If your device has WWAN capability, remove the SIM (see
).
6.
Remove the keyboard (see
).
To remove the hard drive or the solid state drive:
1.
Loosen the Phillips PM2.5×10.0 captive screw (1), and remove the 2 Phillips PM2.0×3.0
screws (2) that secure the drive assembly to the base enclosure.
screws (2) that secure the drive assembly to the base enclosure.
48
Chapter 4 Removal and replacement procedures