HP (Hewlett-Packard) 5102 ユーザーズマニュアル
Top cover
Description
Spare part number
Top cover with TouchPad, black
577926-001
Top cover with TouchPad, red
598461-001
Top cover with TouchPad, blue
598462-001
Before removing the top cover, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
then unplugging the AC adapter from the device.
4.
5.
).
6.
).
7.
Remove the keyboard (see
8.
Remove the hard drive or solid state drive (see
9.
Remove the WLAN module (see
)
Remove the top cover:
1.
Turn the device upside down, with the front toward you.
2.
Use a thin, flat tool to release the 4 rubber device feet.
3.
Remove the 4 Torx T8 2.5×5.0 screws (1), and the 4 Phillips PM2.0×3.0 screws (2) that secure the
top cover to the base enclosure.
top cover to the base enclosure.
Component replacement procedures
55