HP (Hewlett-Packard) 6930p ユーザーズマニュアル
Reverse this procedure to install the speaker.
Audio/ExpressCard assembly
Description
Spare part number
Audio/ExpressCard assembly (includes ExpressCard slot, cable, headphone and microphone
connectors, and SD card reader slot)
connectors, and SD card reader slot)
482959-001
Before removing the audio/ExpressCard assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the following:
a.
)
b.
Keyboard (see
)
c.
Switch cover (see
d.
Display assembly (see
)
e.
Top cover (see
f.
g.
)
Remove the audio/ExpressCard assembly:
1.
Release the ZIF connector (1) to which the audio/ExpressCard assembly cable is attached, and
disconnect the audio/ExpressCard assembly cable from the system board.
disconnect the audio/ExpressCard assembly cable from the system board.
2.
Lift the right side of the audio/ExpressCard assembly (2) to disconnect it from the system board.
90
Chapter 4 Removal and replacement procedures