HP (Hewlett-Packard) HP 530 ユーザーズマニュアル

15.4-inch, WXGA BrightView display assembly for use only with computer models with WLAN

capability (includes wireless antenna transceivers and cables)

440716-001

15.4-inch, WXGA BrightView display assembly for use only with computer models without WLAN

capability

440715-001

Before removing the display assembly, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the memory/WLAN module compartment cover (see 

) and

disconnect the wireless antenna cables from the WLAN module (see 

).

Remove the following components:

. Switch cover (see 

. Keyboard (see 

Remove the display assembly:

Close the computer and turn it upside down, with the rear panel toward you.

Remove the two Phillips PM2.0×7.0 screws that secure the display assembly to the computer.

Turn the computer display-side up, with the front toward you.

Open the computer until the display assembly is in an upright position.

Component replacement procedures 47