HP (Hewlett-Packard) HP 530 ユーザーズマニュアル
RTC battery
NOTE:
Removing the RTC battery and leaving it uninstalled for 5 or more minutes causes all passwords
and CMOS settings to be cleared.
Description
Spare part number
RTC battery
438556-001
Before removing the RTC battery, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
5
.
Remove the following components:
a
b
. Memory/WLAN module compartment cover (see
c
)
d
. Switch cover (see
e
. Keyboard (see
f
.
)
g
. Base enclosure (see
)
Remove the RTC battery:
▲
Use a non-conductive, flat-bladed tool to pry the RTC battery out of the socket.
54 Chapter 4 Removal and replacement procedures