HP (Hewlett-Packard) C2M29UA ユーザーズマニュアル

For use in the United States, Black

698694-001

For use in French Canada, Black

698694-DB1

Before removing the keyboard, remove the following components:

Battery (see 

)

Service door (see 

)

Remove the keyboard:

Remove the Phillips 4.0 x 2.5 screw (1) in the WLAN module bay that secures the keyboard to

the computer.

Using a thin, flat-bladed screwdriver, gently pry loose the three snaps (2) inside the battery bay to

release the top edge keyboard tabs.

Turn the computer right-side up, with the front toward you.

Open the computer as far as possible.

Lift the rear edge of the keyboard, and then tilt the keyboard forward onto the palm rest.

Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached, and

then disconnect the keyboard cable (2) from the system board.

Component replacement procedures

39