HP (Hewlett-Packard) C2M29UA ユーザーズマニュアル

ページ / 94
TouchPad button board
Description
Spare part number
TouchPad button board (includes bracket and cable)
640885-001
Before removing the TouchPad button board, remove the following components:
1.
2.
Service door (see 
)
3.
Hard drive (see 
4.
Optical drive (see 
)
5.
Keyboard (see 
6.
Top cover (see 
Remove the TouchPad button board:
1.
Release the ZIF connector (1) to which the TouchPad button board cable is attached, and then
disconnect the cable (2) from the TouchPad.
2.
Remove the screw (3).
3.
Remove the TouchPad button board (4).
Reverse the above procedure to reassemble and install the TouchPad button board.
46
Chapter 4   Removal and replacement procedures