HP (Hewlett-Packard) C2M29UA ユーザーズマニュアル

39.6-cm (15.6-in) High Definition (HD), LED BrightView display assembly:

●

For use in charcoal grey computer models

639512-001

●

For use in Pacific blue computer models

701769-001

●

For use in black computer models

707798-001

●

LCD rubber kit

640882-001

●

Display hinges

639511-001

●

Display hinge covers

640882-001

Before removing the display assembly, remove the following components:

Battery (see 

Service door (see 

)

Optical drive (see 

)

)

Keyboard (see 

Top cover (see 

USB board (see 

)

Remove the display assembly:

Turn the computer right-side up, with the front toward you.

Open the computer as far as possible.

Disconnect the display panel cable (1) from the system board and remove it from its routing

channel.

Pull the antenna cables through the opening in the base enclosure (2), and then disengage the

cables from the clip in the routing channel leading to the display hinge.

Support the display assembly when removing the display screws in the following

steps. Failure to support the display assembly can result in damage to the assembly and other

components.

Remove the five Phillips 6.0 x 2.5 screws (3) that secure the display assembly to the computer.

50

Chapter 4   Removal and replacement procedures