HP (Hewlett-Packard) C6Z60UA#ABA ユーザーズマニュアル

Reverse this procedure to reassemble and install the hard drive.

RTC battery (includes cable and double-sided tape)

652650-001

Before removing the RTC battery, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see 

Remove the service cover (see 

Remove the RTC battery:

Disconnect the RTC battery cable (1) from the system board.

Detach the RTC battery (2) from the base enclosure. (The RTC battery is attached to
the base enclosure with double-sided tape.)

Remove the RTC battery.

Reverse this procedure to install the RTC battery.

Component replacement procedures

89