HP (Hewlett-Packard) B9P54UA ユーザーズマニュアル

39.6-cm (15.6-in) High Definition (HD), LED BrightView display assembly:

●

For use in Charcoal Grey computer models

639512-001

●

For use in Sonoma Red computer models

639514-001

●

For use in Luminous Rose computer models

639515-001

●

For use in Pewter computer models

639516-001

●

For use in Pacific Blue computer models

639517-001

●

For use in Sweet Purple computer models

639519-001

●

For use in White computer models

653389-001

Before removing the display assembly, remove the following components:

Battery (see 

)

Service door (see 

)

Optical drive (see 

)

Keyboard (see 

)

Top cover (see 

)

USB board (see 

)

Remove the display assembly:

Turn the computer right-side up, with the front toward you.

Open the computer as far as possible.

Disconnect the display panel cable (1) from the system board and remove it from its routing

channel.

Pull the antenna cables through the opening in the base enclosure (2), and then disengage the

cables from the clip in the routing channel leading to the display hinge.

Support the display assembly when removing the display screws in the following

steps. Failure to support the display assembly can result in damage to the assembly and other

components.

Remove the five Phillips 6.0 x 2.5 screws (3) that secure the display assembly to the computer.

Component replacement procedures

63