HP (Hewlett-Packard) 8570w ユーザーズマニュアル

Fan and heat sink assembly for use in computers with AMD FirePro M4000 graphics cards

690628-001

Fan and heat sink assembly for use in computers with NVIDIA Quadro K2000M graphics cards

690630-001

Fan and heat sink assembly for use in computers with NVIDIA Quadro K1000M graphics cards

690629-001

Before removing the fan and heat sink assembly, follow these steps:

Make special note of each screw and screw lock size and location during removal

and replacement.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the service door (see 

Remove the following components:

a. Hard drive (see 

b. Upgrade bay device (see 

).

Keyboard (see 

d. Top cover (see 

Remove the fan and heat sink assembly:

Position the computer right-side up, with the front toward you.

Disconnect the fan cable (1) from the system board.

Loosen the eight captive screws (2) that secure the video card heat sink to the base enclosure
following the sequence embossed in the heat sinks.

Component replacement procedures

89