HP (Hewlett-Packard) 8760W ユーザーズマニュアル
7.
Remove the keyboard (see
8.
Remove the top cover (see
).
Remove the fingerprint reader:
1.
Position the top cover upside down with the front toward you.
2.
Peel off the tape (1) that secures the fingerprint reader to the top cover.
3.
Lift the fingerprint reader (2) from the top cover.
4.
Slide the fingerprint reader cable (3) out from the clips in the top cover.
5.
Remove the fingerprint reader (4).
Reverse this procedure to install the fingerprint reader.
Audio/USB 2.0 board
Description
Spare part number
Audio/USB 2.0 board
652517-001
Before removing the Audio/USB 2.0 board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the service access cover (see
6.
Remove the optical drive (see
).
96
Chapter 4 Removal and replacement procedures