HP (Hewlett-Packard) 8760W ユーザーズマニュアル
Network cable and jack
NOTE:
The network cable is included in the Cable Kit, spare part number 652545-001.
Before removing the network cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
and then unplugging the AC adapter from the computer.
4.
5.
Remove the service access cover (see
6.
Remove the optical drive (see
).
7.
Remove the keyboard (see
8.
Remove the top cover (see
).
9.
Remove the display assembly (see
).
10.
Remove the fan/graphics board heat sink (see
11.
Remove the network cable:
1.
Disconnect the network cable (1) from the system board.
2.
Flex the sideband (2).
3.
Remove the two Phillips M2.0x3.0 screws (3) that secure the sideband to the base enclosure.
106 Chapter 4 Removal and replacement procedures