HP (Hewlett-Packard) AW389USABA ユーザーズマニュアル
3.
Release the RJ-11 connector (4) from the clip built into the base enclosure.
4.
Remove the modem module cable.
Reverse this procedure to install the modem module cable.
Serial connector and cable
NOTE:
The serial connector and cable are available using spare part number 487120-001.
Before removing the serial connector and cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the following:
a.
)
b.
Optical drive (see
)
c.
Keyboard (see
)
d.
Switch cover (see
e.
Display assembly (see
)
f.
Top cover (see
g.
Rear cover (see
96
Chapter 4 Removal and replacement procedures