Psion Teklogix 7530 G2 ユーザーズマニュアル

Low Power Timeout

To extend laser life, you can select the length of time the scanner remains active 
following a successful decode. The scanner wakes from low power mode when a 
bar code is scanned – a successful decode restores normal blinking.
When you double-tap on this parameter, a dialog box is displayed in which you can 
choose a value of 30 sec, 1 min, 2 min or 3 min.

Parameter Scanning

Setting this parameter to on enables 

decoding of para

meter bar codes. 

Linear Security Level

This parameter allows you to select the security level appropriate for your bar code 
quality. There are four levels of decode security for linear code types (e.g., Code 39, 
Interleaved 2 of 5). Higher security levels should be selected for decreasing levels of 
bar code quality. As security levels increase, the scanner’s decode speed decreases.
Double-tapping on this parameter displays a dialog box in which you can enter a 
value from 1 to 4. 
“Linear security level

 1

” specifies that the following code types must be 

successfully read twice before being decoded:

“Linear security level 2” specifies that all types of codes must be successfully read 
twice before being decoded.

Code Type

Length

Codabar

All

MSI Plessey

4 or less

D 5 of 5

8 or less

I 2 of 5

8 or less