Psion Teklogix 7530 G2 ユーザーズマニュアル

ページ / 296
6.12  Tether Adaptor Cables
The following standard tether cables are available for the external scanners:
CA1010 JB5 to DE9 RS232 Serial Cable: Straight through wiring.
CA1015 JB5 to DE9 RS232 Serial Cable: Null modem (signal lines are 
crossed-over).
CA1020 JB5 to Type B USB: Connects to USB devices with Type B 
receptacles.
For the pinout diagrams for 7530 G2 USB cables PN CA1020 and PN CA1010, 
refer to Appendix B: “Port Pinouts”, page B-3
Special intermediate cabling assemblies are available to allow older devices or 
unique peripherals to be connected to the JB5 tether port. These cabling assemblies 
permit scanner cables to be re-terminated in an intermediate in-line connector 
(called LTW), which then interfaces to one of a number of standard adaptor cables 
with JB5 terminations. 
These kits include assembly instructions and include the mating connector.
1002162 Cable Adaptor LTW - JB5 Scan Decoded.
1002163 Cable Adaptor LTW - JB5 Scan Undecoded.
1002164 Cable Adaptor LTW - JB5 Scan RS-232.
1002165 Cable Adaptor LTW - JB5 Scan RFID.
1002166 Cable Adaptor LTW - JB5 Scan USB.
Contact Psion Teklogix support services (see Appendix A: “Support Services And 
Worldwide Offices”) f
or assistance in the creation of these cable assemblies if you 
wish to take advantage of this capability.