Psion Teklogix 7530 G2 ユーザーズマニュアル

ページ / 296
Chapter 3: Getting To Know Your 7530 G2
The Battery
32
Psion Teklogix 7530 G2 Hand-Held Computer User Manual
3.2  The Battery
The hand-held operates with a Lithium-Ion battery pack. Preparing the unit for 
operation requires that a battery pack be charged and installed in the 7530 G2.
3.2.1  Battery Safety
Important:
Before attempting to install, use or charge the battery pack, it is 
critical that you review and follow the important safety guidelines 
in the section entitled “Lithium-Ion Battery Safety Precautions” 
on page XII.
3.2.2  Removing And Installing The Battery Pack
Note: TURN OFF THE HAND-HELD BEFORE REMOVING THE BATTERY 
PACK. If you do not turn the hand-held off before removing the battery, it 
may be necessary to reboot the unit. Any active sessions may be lost.
Removing The Battery Pack
If your unit is equipped with a handstrap, unhook it from the base of 
the battery.
Press down the release tab at the top of the battery, and slide the battery out.
Installing The Battery Pack
To install the battery pack:
Slide the battery pack with the contoured plastic facing you into the 
7530 G2. Click the battery into place.
If your computer is equipped with a handstrap, insert the hook at the end of 
the handstrap into the slot at the base of the battery.
3.2.3  Battery Chargers
Important:
FOR DETAILED INFORMATION about chargers and docking 
stations, refer to Chapter 6: Peripheral Devices & Accessories 
beginning on page 213. For battery safety, refer to “Lithium-Ion 
Battery Safety Precautions” on page XII.
All batteries must be charged before use. The battery can be charged with a variety 
of chargers. These include: