Seagate ST3500641SV ユーザーズマニュアル

SV35 Series SATA Product Manual, Rev. C

17

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive 
mounting screws. Shock may be applied in the X, Y or Z axis.

These drives comply with the performance levels specified in this document when subjected to a maximum 
operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more 
than two times per second.

The nonoperating shock level that the drive can experience without incurring physical damage or degradation 
in performance when subsequently put into operation is 300 Gs for 500 GB drives and 350 Gs for 250 and 160 
GB drives, based on a nonrepetitive half-sine shock pulse of 2 msec duration.

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the 
drive mounting screws. Vibration may be applied in the X, Y or Z axis.

The maximum vibration levels that the drive may experience while meeting the performance standards speci-
fied in this document are specified below.

The following table lists the maximum nonoperating vibration that the drive may experience without incurring 
physical damage or degradation in performance when subsequently put into operation.

5–22 Hz

+/-0.25”, Displacement limited

22–350 Hz

0.50 Gs

350–500 Hz

0.25 Gs

5–22 Hz

0.25 G (Limited displacement)

22–350 Hz

5.0 Gs

350–500 Hz

1.0 Gs