Toshiba DX730 ユーザーズマニュアル
7.
Seat the memory module cover in place and secure it with the screw.
Take care to ensure that the memory module cover is firmly closed.
Figure 3-11 Seating the memory module cover
1
2
1. Memory module cover
2. Screw
8.
Turn the computer on and make sure the added memory is recognized
- to confirmed it, Start -> Control Panel -> System and Security ->
System icon.
- to confirmed it, Start -> Control Panel -> System and Security ->
System icon.
Removing a memory module
To remove the memory module, follow the steps as detailed below:
1.
1.
Shut down the computer - make sure the Power indicator is off (refer
to the
to the
required).
2.
Remove the AC adaptor and all cables and peripherals connected to
the computer.
the computer.
3.
Turn the computer back to you.
4.
Loosen the screw securing the memory module cover in place -
please note that the screw is attached to the cover in order to prevent
it from being lost.
please note that the screw is attached to the cover in order to prevent
it from being lost.
5.
Slide your fingernail or a thin object under the cover and lift it off.
6.
Push the latches away from the module in order to release it - a spring
will force one end of the module up at an angle.
will force one end of the module up at an angle.
TOSHIBA DX730/DX735/Qosmio DX730 Series
User's Manual
3-38