Aspire Digital 2020 ユーザーズマニュアル

ページ / 128
43
Chapter 2
Parameter
Description
Product Name
This field will show product name.
Manufacture Name
This field will show manufacturer name.
System BIOS Version
This field reports the BIOS version of system.
VGA BIOS Version
This field reports the VGA version of the system.
Hard Disk Mode Name
This item will show the size of HDD installed on 
Primary IDE master. The hard disk size is 
automatically detected by the system. If there is no 
hard disk present or unknown type, “None” should 
be shown on this field.
HDD Serial Number
This item allows the serial number of the Hard Disk. 
If there is no hard disk present or unknown type, 
“None” should be shown on this field.
ATAPI
This item will show the model name of DVD/CD-
ROM drive installed on system. The DVD/CD-ROM 
model name is automatically detected by the 
system. If there is no DVD/CD-ROM model present 
or unknown type, “None” should be shown on this 
field.
Serial Number
This item will show the Serial number of system.
Asset Tag
This item will show the Asset Tag number of the 
system.
UUID
This number only valid when there is an internal LAN 
device presents, otherwise, zero will be display in 
this field.
System
First field reports the model name of processor.
Second field reports CPU Speed.
Insyde Software SCU                                                                          May 20, 2003   
5:40:09  AM 
          Main 
Advanced Security 
Boot 
Exit 
 
 ----Devices--------------------------------------------------- 
-----System------------------------
 
Product Name = Aspire 2010         
CPU = Intel® Pentium ® M 
 
Manufacture Name = Acer 
CPU Speed = 1600 MHz 
 
System BIOS Version = V1.00 
 
 
VGA BIOS Version = 
 
 
 
 
 
HDD Model Name = HITACHI_DK23EA-40 
 
 
HDD Serial Number = 8D4648 
----Memory-----------------------
 
ATAPI Model Name= UJDA740 DVD/CDROM 
 
 
 
Base Memory = 640 KB 
 
Serial #: ( 32 bytes) 
Extended Memory = 255MB 
 
Asset Tag#: (32 bytes) 
VGA Memory = 64 MB 
 
UUID = (16 bytes) 
 
 
 
 
 
 
 
Setup system date, time. Enable boot logo and get system information.