Compac Industries 272637-001 ユーザーズマニュアル

Getting Started

Setting Up the Notebook

A prompt to set up your software is displayed on the screen when 
the notebook is turned on for the first time.

Before responding to the prompt and proceeding through the 
online instructions, read the following caution and other 
installation information.

Ä

CAUTION: To prevent file corruption and be sure that the correct device 
drivers install, during software setup:

■

Do not unplug the notebook from the electrical outlet.

■

Do not shut down the notebook.

■

Do not remove or insert a drive.

■

After you begin the software setup, you must complete the 
entire process without interruption. Setup time varies.

■

If you are prompted to select a language, choose carefully. 
The languages that you do not choose are deleted from the 
system and cannot be restored during the installation.

■

When you are prompted to accept the End User License 
Agreement, you must choose Accept to continue the software 
setup.

Whenever possible, shut down the notebook by following the 
Windows shutdown procedure provided below for your operating 
system. For information about using these procedures, see “Paths 
and Views,” in “Using This Guide” at the front of this guide.

To shut down the notebook, select Start > Turn Off Computer > 
Turn Off button. 

If the notebook does not respond to a Windows shutdown 
procedure, see Chapter 3, “Troubleshooting,” in the section “Is 
the System Unresponsive?”