Fellowes C-220i/C-220Ci ユーザーズマニュアル

•  Though paper detection sensors are designed to be maintenance free, the sensors occasionally become blocked by paper dust, causing the motor to run even

 if there is no paper present. Both sensors are located in the center of the paper entry.
•  Self Cleaning Cycle: Shredder periodically cycles in forward and reverse lasting 3-6 seconds
•  Empty wastebasket when bin full indicator lights up.
•  Shredder won’t run if the door is open, or bin needs to be emptied.
•  Maintenance is an important part of protecting your investment. Don’t forget our oil (35250) and shredder bags (36054).

Before using, fill oil

reservoir with 12 oz. of

shredder oil

Oil will spray out of the nozzles

confirming that the system is 

working properly

To maintain shredder performance,

refill oil reservoir with up to 12 oz.

of shredder oil (Fellowes #35250)

Low oil indicator will

signal when your 

reservoir needs refilling

Once refilled, automatic oiling

will resume.

In sleep mode

To get out of sleep mode

touch control panel

insert paper

or

Advanced Jam Prevention- Electronically
measures paper thickness to prevent paper jams:

Remove several sheets until
indicator is below red.

Continue 100% Jam 

Proof Shredding

If a misfeed

occurs:

If

 illuminates after paper has been  

reversed, press reverse and remove paper.

Otherwise, regular shredding will resume.

Up to RED: Too Many
sheets have been inserted.

Up to GREEN: More sheets
can be added.

Up to YELLOW: Productivity
is optimized.

All indicators light up and
shredder pauses for 3-6 seconds

Wait for flashing to stop after automatic correction 
is complete. Regular shredding will resume.

Turn the shredder ON

( ) to activate SafeSense

®

Touch test area and

look for the SafeSense

®

 

indicator to illuminate

SafeSense

®

 is active and 

working properly

To test, press the auto and  

forward (      ) buttons at the 

same time

DO NOT OVERFILL.