Atlantis Land A01-IU1 ユーザーズマニュアル

                                                                        ENGLISH

 

44 

After you have installed your MISTRAL USB, you are highly 
recommended to use the diagnostic program to make sure 
the ISDN TA, its drivers and the ISDN line are all properly 
installed and connected.  To run the diagnostic program 
please follow these instructions: 

•  Open the Programs folder on the Start menu and 

click on the ISDN Utility program folder. 

•  Click on the Diagnostic Program item to start the 

program. 

•  In the Own ISDN Number box, type in the 

subscriber number of your own ISDN line. 

•  Press  Loopback Test to begin the diagnostic 

procedure.  It will make a call from the B1 channel 
that returns through the B2 channel.  The D and B 
channels will be tested for line integrity. 

•  Please Troubleshooting if you see any error or 

warning message.