ATTO Technology FC 3305 ユーザーズマニュアル

ページ / 17
7 
ATTO Technology ExpressPCI FC 3300 and FC 3305 Installation and Operation Manual
4 Installing/updating device drivers and firmware
ExpressPCI FC host adapters require device drivers and firmware for proper operation. Your adapter 
firmware was properly flashed before shipment, but the firmware may need to be updated as new 
versions become available, or if the factory-installed version becomes corrupt. Visit the ATTO website, 
www.attotech.com, to download the latest drivers and firmware.
ATTO recommends using the same device driver 
and firmware version. To verify the version: 
Windows 
Use the ATTO ExpressPCI 
Configuration Tool for complete information 
about the driver and firmware version or use a 
combination of the adapter boot string (firmware 
version) during system boot and the Device 
Manager (driver version)
Mac OS X 
Use the ATTO ExpressPCI 
Configuration Tool (driver and firmware version 
available) or Apple System Profiler (driver 
version only)
Windows 2000/XP driver installation
New installation
1
After initial devices have been loaded, the 
installer will prompt the user to Specify 
Additional Device 
by using the option.
2
When prompted for vendor’s disk, insert the 
ATTO ExpressPro-Tools CD-ROM, into the drive 
and press the
 ENTER key.
3
Select ExpressPCI FC and then press the ENTER 
key. 
4
Continue the installation of the operating 
system. The Windows 2000 installation may 
request the ExpressPCI driver disk again.
5
Reboot the system.
Pre-existing installation
1
Boot into Windows 2000/XP. The New Hardware 
Wizard 
window will appear. 
2
Click Next.
3
Choose the Search for a suitable driver for my 
device 
option.
4
Insert the ATTO ExpressPro-Tools CD.
5
In next window, be sure the CD-ROM is selected 
as the source for the driver.
6
Once the system finds the driver, click the Next 
button.
7
Click Yes when the system prompts to continue 
installation. 
8
Reboot system.
Updating the Windows 2000 driver
1
Right-click My Computer and select Properties.
2
Select the Hardware tab and select Device 
Manager.
3
Right-click the ATTO ExpressPCI adapter 
description, located under SCSI and RAID 
controllers, and select 
Properties.
4
Go to the Driver tab and select Update Driver.
5
Select Next.
6
Choose the Search for a suitable driver for my 
device 
option.
7
Choose the appropriate path to the new driver 
location.
8
Once the system finds the driver, click the Next 
button.
9
Click Yes when the system prompts to continue 
installation.
10
Reboot system
Windows NT driver installation
New installation
1
Begin the Windows NT installation using the 
Windows NT Installation floppy diskettes.
2
During the installation after initial devices have 
been loaded, the installer will prompt you to 
Specify Additional Devices by using the S option.
3
When prompted for vendor’s disk, insert the 
ATTO ExpressPro-Tools CD-ROM into the drive 
and press the ENTER 
key.
4
Select ExpressPCI FC and then press the ENTER 
key.
5
Continue the installation of the operating 
system. The Windows NT installation may 
request the Express FC driver disk again.
Pre-existing installation
1
Enter the Control Panel on the Start Menu under 
Settings.
2
Locate and double click on the SCSI Adapter icon
3
Click on the Drivers tab and then the Add button.
4
When the Install Driver screen appears, select 
Have Disk.
5
Place the ATTO ExpressPro-Tools CD-ROM into 
the drive
6
Change the path in the Copy Manufacturers files 
from 
to the appropriate drive.
7
Select ExpressPCI FC and click OK.
8
When the driver is finished loading, reboot the 
system.