ATTO Technology R348 v ユーザーズマニュアル

  

3

Navigate to the expanded software package 
folder. 

4

The ExpressSAS Windows driver is located in 
the base directory. The x86 package also 

includes a Storport directory. Navigate to the 
folder with the desired ExpressSAS driver.

5

Run makedisk.exe.

6

Follow the instructions to complete the 
installation.

The ATTO ExpressSAS adapter supports Macintosh 
operating systems: Mac OS X 10.4 or later

1

Power on your system.

2

Double click the supplied gzip file. 

3

A dmg is installed on the desktop. Mount the 
dmg file.

4

Open the contents of the mounted file.

5

Double-click on the installer.

6

Follow the on-screen instructions

7

Reboot. 

8

Continue to 

The ATTO ExpressSAS adaptor supports Linux 
operating systems RedHat ES 3, 4; Suse Linux 9, 9.1, 
9.2, 9.3, 10, 10.1 and the following architectures: i386 
(with or without CONFIG_REGPARM); x86_64 
(AMD64, Intel EM64T).

Note

1

Power on your system.

2

Unzip and untar the driver files:$ tar xfz 
filename.tgz

3

Change to the extracted directory:$ cd 
extracted_directory_name

  Make sure there are no spaces in the path in 

which you extract the archive. The Linux kernel 
Makefile will fail if the path name contains a 
space character.

  Kernel header files must be installed to build this 

driver. If the files are in a non-standard location, 
modify the KDIR variable in the Makefile.

4

As root, make and install the modules:$ make 
install

5

The modules are ready to use. If drivers load 
automatically, continue to 

page 5. Otherwise, refer to 

•  To load a driver manually, type $ modprobe 

  You may receive a warning that the module will 

taint the kernel.

•  Red Hat Hardware Discovery Utility may ask you 

to Configure the Device, Ignore, or Do 
Nothing after loading the driver for the first time. 
Select Configure and follow the utility’s 
configuration prompts.

•  To load a driver at boot if your system does not 

do so automatically: 

• Red 

Hat 

4. Add the following line to 

/etc/modprobe.conf after installing the 
driver: alias scsi_hostadapterX esasraid

where X is the next available number.

•  Red Hat 3. Add the following line to /etc/rc. 

modules after installing the driver 
modprobe esasraid

You may need to create /etc/rc.modules 
and make it executable with ‘chmod +x 
/etc/rc.modules’

• SUSE 

9

1

Run the yast utility by selecting it the GUI under 
System in the application menu or running it 
from a command line.

2

Select Hardware

3

Select Disk Controller

4

Under Disk Controller Configuration, select 
the ATTO device.

5

Under the Module to Use heading, select the 
esasraid module

6

In the box next to Load Module in initrd, put an 
X

7

Select Finish to complete the configuration.

•  SUSE 10. Add the following line to 

/etc/init.d/boot.local after installing the 
driver: modprobe esasraid