Apple EPR2320TM ユーザーズマニュアル

 

 

Read the warnings and caution on this page. Then, follow the subsequent 
installation procedures to ensure proper gateway cable modem operation when 
using wireless network devices. 

Follow these steps to install the gateway cable modem for accessing wireless 
network devices. 

 

1. 

Select locations for wireless network devices. For more information, see 
How Do I Select and Place Wireless Network Devices, earlier in this 
guide. 

2. 

Connect and install the wireless network device(s). 

3. 

Connect the active RF coaxial cable to the CABLE connector on the back 
of the gateway cable modem. Use an optional cable signal splitter to add 
a TV, a DHCT or set-top converter, or a VCR. 

4. 

After all connections are complete, insert the AC power adapter cord into 
the DC POWER connector on the back of the gateway cable modem, and 
then plug the power adapter into an AC power source. The gateway 
cable modem begins an automatic search to locate and sign on to the 
network that provides the telephone service. In some unusual 
circumstances, this process may take up to 5 minutes. The gateway 
cable modem is ready for use when the CABLE status indicator on the 
front panel stops blinking and illuminates continuously. 

 

Some 2.4 GHz cordless telephones can interfere with wireless 

signals. Unplug and disconnect any cordless phones until your wireless 
network is operating properly. 

5. 

Verify that all wireless network devices are working properly. 

 
 
 
 
 
 

 

•  Hazardous electrical 

•  To avoid personal