Abocom WB2000 ユーザーズマニュアル

 

- 

 

A preamble is a signal used in wireless 

environment to synchronize the 

transmitting timing including 

Synchronization and Start frame 

delimiter. (Note: Please check the 

setting of AP first.) 

~ Auto 

Select  Auto for the Network adapter 

to select the Preamble type 

automatically depending on the 

Access Point Preamble type. 

~ Long 

If in a "noisy" network environment, 

the Preamble Type should be set to 

Long Preamble. 

~ Short 

The  Short Preamble is intended for 

applications where minimum overhead 

and maximum performance is desired. 

If in a "noisy" network environment, 

the performance would be decreased. 

This value should remain at its default 

setting of 2347.  Should you 

encounter inconsistent data flow, only 

minor modifications of this value are 

recommended.  

Select from 

, 2, 3, 4 or No selection.

This setting is the configuration key 

used in accessing the wireless network 

via WEP encryption.   

Fill in the appropriate value/phrase. 

SSID SSID is the unique name shared 

among all points in your wireless 

network. It must be identical for all 

points in the network.  It is 

case-sensitive and must not exceed 32 

characters.    Make sure that all points 

in the network are set the same. 

WEP is a data privacy mechanism 

based on a 64 Bit/128 Bit shared key 

algorithm. 

Select WEP key 128bit or WEP key 

64bit to enable WEP encryption.