Abocom UTA128 ユーザーズマニュアル
S/T ISDN Interface
Support OSI level 1 conform to UIT-T I.430
for basic access at S and T interfaces (ETSI
300012/ANSI T1.605)
for basic access at S and T interfaces (ETSI
300012/ANSI T1.605)
Line interface transformer direct drive
Full-duplex transmission at 192kbps on
separate transmit and receive twisted pairs
using alternate mark inversion (AMI) line
coding
separate transmit and receive twisted pairs
using alternate mark inversion (AMI) line
coding
2 B channels at 64kbps each plus 1 D channel
at 16kbps
at 16kbps
All I.430 wiring configurations supported
including passive bus for TE’S distributed
point to point and point to multipoint
including passive bus for TE’S distributed
point to point and point to multipoint
Multiframe support
Analog part: included with adaptive detection
threshold and equalizer
threshold and equalizer
USB Interface
USB 1.0 specification full compliance, 1.1
specification compatibility (1.1 power
management compliance), 12 Mbps full speed
specification compatibility (1.1 power
management compliance), 12 Mbps full speed
On-chip USB transceiver with digital PLL
6 isochronous endpoints for B1, B2, D
channels data. interrupt endpoint for I430
channels data. interrupt endpoint for I430
Isdn protocol and data.control endpoint for
USB standard plus vendor specific request
USB standard plus vendor specific request
Communication device class and vendor
- 16 -