Chaparral G5312/G7313 ユーザーズマニュアル
3-1
3
Accessing the Disk Array
Administrator Software
You can display and change a variety of settings using the Disk Array Administrator
software. Using the Disk Array Administrator, you can:
software. Using the Disk Array Administrator, you can:
!
Create and mange arrays (see Chapter 4, Creating and Managing Arrays)
!
Monitor system status (see Chapter 5, Monitoring System Status)
!
Manage spares (see Chapter 6, Managing Spares)
!
Configure the controller (see Chapter 7, Configuring the Controller)
!
Manage disk drives and enclosures (see Chapter 8, Managing Disk Drives and
Enclosures)
Enclosures)
You can access the Disk Array Administrator software using the RS-232 serial port
connection on the controller. You must connect a computer with terminal emulator
software, such as HyperTerminal, to the serial port according to Connecting to the
RS-232 Port on page 2-2.
connection on the controller. You must connect a computer with terminal emulator
software, such as HyperTerminal, to the serial port according to Connecting to the
RS-232 Port on page 2-2.
Accessing the Disk Array Administrator
Using the RS-232 Serial Port
You can access the Disk Array Administrator software using the RS-232 serial port.
You must use a straight-through serial cable. You cannot use a null modem cable.
Configure the RS-232 port in your terminal emulator software using the following
settings:
settings:
Setting
Value
Terminal Emulation
VT-100 or ANSI (for color support)
Font
Terminal