Chaparral G5312/G7313 ユーザーズマニュアル
G- and K-Series User’s Guide
5-4
Viewing a Whole Screen of Events
You can also view events from the log file a whole screen at time. This lets you
quickly review all recent events. The events display in chronological order, that is, the
most recent event is last.
quickly review all recent events. The events display in chronological order, that is, the
most recent event is last.
To display a whole screen of events:
1
From anywhere in the Disk Array Administrator software, press CTRL-E.
The first screen of events from the event log displays.
2
Press u to page up or d to page down in the log.
3
Keep pressing CTRL-E to page through the other information screens and
return to the menu.
return to the menu.
Capturing the Event Log File
You can also capture the entire event log, which saves it to a file on your hard drive.
This is useful if you want to print the log or attach it to an e-mail message.
This is useful if you want to print the log or attach it to an e-mail message.
The steps below use HyperTerminal as the terminal emulator software. If you use a
different terminal emulator, your procedure may be different.
different terminal emulator, your procedure may be different.
To capture the event log file:
1
With HyperTerminal up and running as your RS-232 interface terminal, press
CTRL-E until the event log displays.
CTRL-E until the event log displays.