Canon AXIS 1650 ユーザーズマニュアル

40

AXIS 1650 User’s Manual

The management and configuration tools that are supported by the AXIS 

1650 allow you to:

•

Change print server parameters

•

Receive extended information about print jobs

•

Receive printer port status and monitor printers

•

Reset the AXIS 1650

The method you should use to manage and configure your AXIS 1650 is 

dictated by your TCP/IP network. 

Configuration/Management methods:

•

Embedded Web Pages using a Web Browser - See page 40.

•

FTP - See page 52.

•

SNMP - See page 53.

All Axis print servers contain an embedded Web server that can be 

accessed through a Web browser. The embedded Web server provides 

access to configuration and management pages for the print server and 

the connected printer.

Once you have established the AXIS 1650 in the TCP/IP environment, as 

described in Set the IP Address, on page 11, you can access the AXIS 

1650 Web pages from any standard Web browser. 

The Web interface has two modes of operation: User mode and Admin 

mode.

In User mode you can change language of the Web interface, but you 

have no rights to change any other parameters. This mode is intended for 

regular users who are only interested in using the print server's interface 

for checking print jobs or viewing printer properties. If you want to 

change any other settings, you must enter the Admin mode. See “Services 

When in Admin mode, you have access to all the print server's parameters 

and you can change them after your needs. This mode is intended for 

network administrators and can be password protected to prevent 

unauthorized changing of parameters. See “Services Available from the