Canon AXIS 1650 ユーザーズマニュアル

AXIS 1650 User’s Manual

47

To change the print server’s general parameters, select Admin | General 

Settings => Change in the Web interface.

Note: All print server settings have default values that have been 

carefully selected by Axis. In most instances, there is no need to change 

the default values. Observe that all network configuration should involve 

the Network Administrator.

Print Server Name

This name identifies the print server to the users and will be part of the 

default name of the connected printer and printer queue name. The 

default name is AXISXXXXXX, where XXXXXX are the last six digits of 

the print server serial number. 

server name is AXIS181636. 

System Name

This name identifies the network printer to the users.

System Location

This parameter allows you to specify where the network printer is located 

in your organization. This enables you to find the device you are working 

with.

System Contact

Enter the name of e.g. the System Manager.

System Contact Phone Nbr.

Enter the telephone number of e.g. the System Manager.

System Comment

Enter comments regarding the network printer.

Language

Select the language to be displayed in the print server’s embedded Web 

pages: English or Japanese.

Root Password

Enter a password in the field. Up to 15 alphanumeric characters can be 

entered. 

Network Speed

Set your network speed: 10_HALF_DX, 10_FULL_DX, 100_HALF_DX, 

100_FULL_DX or let the print server sense the correct speed 

(AUTO_SENSE).

SNMP Enabled

Select Yes to permit access using the SNMP protocol, select No to reject 
access using the SNMP protocol.
Default = Yes

Community Name

Specify the community name for SNMP. Up to 32 alphanumeric 

characters can be entered.