Cabletron Systems W85 ユーザーズマニュアル
Network Tools
HSIM-W85 User’s Guide
4-3
4.2
NETWORK TOOLS
The Network Tools utility allows management of objects in the
HSIM-W85 Management Information Bases (MIBs). MIBs are databases
of objects used for managing the device and configuring the HSIM-W85.
The commands within the MIB Navigator allow the user to view and
modify a device’s objects.
HSIM-W85 Management Information Bases (MIBs). MIBs are databases
of objects used for managing the device and configuring the HSIM-W85.
The commands within the MIB Navigator allow the user to view and
modify a device’s objects.
The host platform software contains either the Network Tools utility, or
the MIB Navigator utility. They are essentially the same tool, with some
minor differences depending on the platform. They will both be referred
to as Network Tools in this document, and there is no difference in their
use for the purpose of this document. Using Network Tools may be a
more convenient method for a user to configure the HSIM-W85 than
using the MIBs in some circumstances. Full functionality is still available
by using the MIBs. The host platform has a set of functions for Network
Tools that are used on that platform. The following additions to the
Network Tools utility from the WAN perspective are specific to the
HSIM-W85, and can only be used when an HSIM-W85 is installed in the
platform.
the MIB Navigator utility. They are essentially the same tool, with some
minor differences depending on the platform. They will both be referred
to as Network Tools in this document, and there is no difference in their
use for the purpose of this document. Using Network Tools may be a
more convenient method for a user to configure the HSIM-W85 than
using the MIBs in some circumstances. Full functionality is still available
by using the MIBs. The host platform has a set of functions for Network
Tools that are used on that platform. The following additions to the
Network Tools utility from the WAN perspective are specific to the
HSIM-W85, and can only be used when an HSIM-W85 is installed in the
platform.
•
imux – support for configuration and monitoring of the Inverse
Multiplexer (ctwan-multi-imux-mib.txt, Revision 1.00.00)
Multiplexer (ctwan-multi-imux-mib.txt, Revision 1.00.00)
•
ds1alarm – support for ds1 alarm monitoring (ctremote-mib.txt,
Revision 1.00.02, Ds1Alarms branch)
Revision 1.00.02, Ds1Alarms branch)
•
wanpq – support for Wan IP Priority Queuing (ctremote-mib.txt,
Revision 1.00.02, ctIPPQFilters branch)
Revision 1.00.02, ctIPPQFilters branch)
•
dsx1 – support for RFC 1406 statistics and configuration
•
ds1ext – support for extensions to RFC 1406 (ctremote-mib.txt,
Revision 1.00.03 CtDS1Ext branch)
Revision 1.00.03 CtDS1Ext branch)
Important Notice
The HSIM-W85 statistics that are accessed using the Switch and
Interface Statistics screens are not explained in this manual. Refer to the
applicable host platform manual for details. “T1 Interface” will be displayed
as the name of the eight HSIM-W85 T1 interfaces in the statistics
screens. The HSIM-W85 Interface port will display as “WAN HSIM-W85
Interface” in the statistics screen.
Interface Statistics screens are not explained in this manual. Refer to the
applicable host platform manual for details. “T1 Interface” will be displayed
as the name of the eight HSIM-W85 T1 interfaces in the statistics
screens. The HSIM-W85 Interface port will display as “WAN HSIM-W85
Interface” in the statistics screen.