Cabletron Systems W85 ユーザーズマニュアル

The built-in commands listed in this section activate configuration and 
viewing functions on the HSIM-W85. 

imux <IMUXID> 
imux <IMUXID> -[ea | da]
imux <IMUXID> -[eg | dg] <GROUPID> 
imux <IMUXID> -[ac | dc] <GROUPID> 
<INTERFACENUM> 

imux is used to combine multiple WAN channels into 
logical inverse multiplexing (IMUX) groups. Once IMUX 
is configured, data will be evenly distributed over all of 
the logical channels configured.

<IMUXID> - A unique value identifying an element in a 
sequence of Inverse Multiplexer Applications which 
belong to an IP host.

<GROUPID> - A unique value identifying an element in 
a sequence of groups which belong to a WAN Inverse 
Multiplexer Application.

<INTERFACENUM> - The MIB II ifIndex value used to 
represent a WAN channel that has an appropriate datalink 
protocol associated with it.

Cabletron Systems products that support Inverse Multiplexing 
(IMUX), such as the HSIM-W85, HSIM-W87, HSIM-W6, 
CSX400, and HSIM-W84, must exist on both ends of the WAN 
link for the IMUX function to work. All bridging and switching 
functions, such as 802.1D, SecureFast VLAN, and 802.1Q are 
able to run as normal on the host platform when using the 
IMUX function on the HSIM-W85.