Bradley Smoker 1734-AENT ユーザーズマニュアル
Publication 1734-UM011C-EN-P - January 2006
5-22 Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software
Use the controller tags in your ladder program to read input data or
write output data.
write output data.
• For RSLogix 5000 programming instructions, refer to RSLogix
5000 Getting Results, publication 9399-RLD300GR.
• For ControlLogix controller information, refer to ControlLogix
System User Manual, publication 1756-UM001.
• Slot Status Bits: The Slot Status bits display the connection status
for each of the POINT I/O modules that use a rack-optimized
connection.
connection.
– Bit 0 is reserved for the adapter and always reports a value of
1.
– Each of the other bits (1 to 63) correspond to a POINT I/O
module that you install in the POINT I/O backplane.
– In this example, we configured the 1734-AENT adapter for
both rack-optimized and direct connections.
The slot status bits indicate that we installed the module in
slot 2 with it operating correctly:
The slot status bits indicate that we installed the module in
slot 2 with it operating correctly:
• 0=module participating with no errors and
• 1=module not participating or connection error (typically,
• 1=module not participating or connection error (typically,
module removed/missing)