Cabletron Systems WPIM-RT1 ユーザーズマニュアル
Full T1 Configuration Using PPP
WPIM-RT1 User’s Guide
3-11
3.3
FULL T1 CONFIGURATION USING PPP
This section provides step-by-step instructions for configuring the
WPIM-RT1 to use a full T1 circuit in a PPP environment. This simplified
example assumes the setup shown in
WPIM-RT1 to use a full T1 circuit in a PPP environment. This simplified
example assumes the setup shown in
using a CSX400 with a
WPIM-RT1 installed at Site #1. Configurations may vary depending on
the host platform.
the host platform.
Figure 3-6
Full T1 Configuration
The line configuration information shown in
must be supplied
by the service provider.
Table 3-1
Telco Configuration Information
Configuration Information
Required by User
Configuration Information
Supplied by Service Provider
Line Coding
B8ZS or AMI
Frame Type
ESF or D4
Clock Source
Loop Timing or Local Timing
SITE #1
Telco Cloud
24 Timeslots
24 Timeslots
SITE #2
1482_05