8e6 Technologies ProxyBlocker ユーザーズマニュアル
G
LOBAL
A
DMINISTRATOR
S
ECTION
C
HAPTER
1: S
YSTEM
SCREEN
8
E
6 T
ECHNOLOGIES
, P
ROXY
B
LOCKER
U
SER
G
UIDE
139
Modify the NIC Mode Setting
WARNING: If changing the NIC mode, be sure the hub/switch to
which the ProxyBlocker is connected will support the selected
NIC mode. An incorrect setting may prevent you from accessing
the ProxyBlocker console.
which the ProxyBlocker is connected will support the selected
NIC mode. An incorrect setting may prevent you from accessing
the ProxyBlocker console.
To modify the NIC setting, in the LAN1 or LAN2 frame:
1. Click the radio button for the available option you wish to
select: 10baseT-Full Duplex, 10baseT-Half Duplex,
100baseT- Full Duplex, 100baseT-Half Duplex, or
1000baseT-Full Duplex, if available on your Proxy-
Blocker model (see NIC Mode Speeds Chart).
100baseT- Full Duplex, 100baseT-Half Duplex, or
1000baseT-Full Duplex, if available on your Proxy-
Blocker model (see NIC Mode Speeds Chart).
2. Click Apply to activate the new NIC mode setting.
NOTE: The status (Up or Down) of the Interface displays to the
right of the LAN1 and LAN2 labels. For an Interface with an “Up”
status, the Link status (Up or Down) displays to the right of the
Interface status.
right of the LAN1 and LAN2 labels. For an Interface with an “Up”
status, the Link status (Up or Down) displays to the right of the
Interface status.