Sanyo POA-PN40 ユーザーズマニュアル
14
Chapter 2 Installation
The following are instructions for attaching this product to the projector and connect-
ing it to the network. Please review the entire procedure to become familiar with it.
ing it to the network. Please review the entire procedure to become familiar with it.
Function of the Network Unit
(☞ p.15)
1
Installation and network configuration
(☞ p.16-22)
2
Set up is complete
1
Mount this product onto the projector.
2
Connect the LAN cable and join it to the network.
3
Configure the network of the Network Unit.
4
Set the network PIN code.
Flow of installation
The preparation is complete to control the projector connected to the network. At next
step, set up and control the projector via the network by using the web browser installed
on your computer. Please see chapter 3 "Basic Setting and Operation". (☞ p.23)
step, set up and control the projector via the network by using the web browser installed
on your computer. Please see chapter 3 "Basic Setting and Operation". (☞ p.23)
Explains the name and functions of each part of the Network Unit.