Sony PEGA-WL110 マニュアル
![Sony](https://files.manualsbrain.com/attachments/7e61ba04cadfce70cb41a1a70ef1d62a30f0a5fe/common/fit/150/50/682a2570dc00831b079177f57c62a2915dd3423eb752334060fbcf750d89/brand_logo.png)
14
US
Performing Communications via a
Wireless LAN Access Point
(Infrastructure Mode)
Wireless LAN Access Point
(Infrastructure Mode)
You can wirelessly access the Internet or perform communications
with another communication device through a Wireless LAN access
point.
with another communication device through a Wireless LAN access
point.
Basic Settings
Before setting up
You first need to input a couple of values to set the Wireless LAN access point
you use. Check the following values in advance.
[NetworkID (SSID)]: It is also called ESS-ID or Network Name.
[WEP (Wired Equivalent Privacy)]: It is also called Encryption.
For details, ask your System Administrator. If you have a Wireless LAN access
point for your personal use, refer to the operating instructions of the Wireless
LAN access point.
you use. Check the following values in advance.
[NetworkID (SSID)]: It is also called ESS-ID or Network Name.
[WEP (Wired Equivalent Privacy)]: It is also called Encryption.
For details, ask your System Administrator. If you have a Wireless LAN access
point for your personal use, refer to the operating instructions of the Wireless
LAN access point.
Note
The Wireless LAN card uses a channel between 1ch. and 11ch.(2.4 GHz
frequency band). If your Wireless LAN access point uses a channel between
12ch. and 14ch., it is impossible to perform communications using the Wireless
LAN card.
frequency band). If your Wireless LAN access point uses a channel between
12ch. and 14ch., it is impossible to perform communications using the Wireless
LAN card.
1
Insert the Wireless LAN card in the Wireless
Communication Slot of your CLIÉ handheld.
Communication Slot of your CLIÉ handheld.
2
Tap the [Prefs] icon on the home screen of your CLIÉ
handheld.
handheld.
The [Preferences] screen appears.
3
Tap V in the top right-hand corner of the screen, and
select [Network].
select [Network].
The [Network] screen appears.