Patton electronic 07M2160-GS ユーザーズマニュアル
Administration Options
61
Model 2160 Series Getting Started Guide
4 • Web configuration
Community Pool
An SNMP community is a group of devices and management stations running SNMP. It helps define where
information is sent. The community name is used to identify the group. A SNMP device or agent may belong
to more than one community. It will not request information from management stations that do not belong to
one of its communities.
An SNMP community is a group of devices and management stations running SNMP. It helps define where
information is sent. The community name is used to identify the group. A SNMP device or agent may belong
to more than one community. It will not request information from management stations that do not belong to
one of its communities.
Click Modify to set up community pools.
Figure 38. SNMP community pool configuration
In the table of the current community pool, you can set up access:
•
Status: Enable–Turn on the SNMP function; Disable–Turn off the SNMP function
•
Access Right: Deny–Restrict all access; Read–Read-only access; Write–Read/write access
•
Community: The password for write access.
After configuring the community pool, click Finish. The browser will prompt the configured parameters and
check it before writing into NVRAM. Press Restart to reboot the Model 2160 with the new settings. Click
Continue to configure other options.
check it before writing into NVRAM. Press Restart to reboot the Model 2160 with the new settings. Click
Continue to configure other options.
Table 13. Default SNMP Communities
Access Right
Community
Read
public
Write
private