Panasonic WJ-GXD900 ユーザーズマニュアル
11
DIP1: Normally, select OFF. When ON is selected,
the firmware, as the start up program (loaded at
the factory), starts up. The value of the settings
will not be deleted.
the factory), starts up. The value of the settings
will not be deleted.
DIP2: When ON is selected, the IP address and all
the current settings will return to the default
settings.
settings.
DIP3: When ON is selected, the initialization of the
IP address will start. (The initialization of the IP
address starts only when the DIP4 is set to OFF.)
address starts only when the DIP4 is set to OFF.)
DIP4: When ON is selected, DHCP will be available.
DIP5: Normally, select OFF. To change to the Main
DIP5: Normally, select OFF. To change to the Main
CPU mode, select ON.
Note: The Main CPU mode is the advanced function
for integrated control. Use these switches with
the default settings for normal use.
the default settings for normal use.
DIP6: Reserved
DIP7: When ON is selected, the HTTP server will
DIP7: When ON is selected, the HTTP server will
stop its service.
DIP8: Normally, select OFF.
To select the IPL (Initial Program Loader) mode
for start up, set this switch to ON. (Only for
testing)
To select the normal mode, set this switch to
OFF.
for start up, set this switch to ON. (Only for
testing)
To select the normal mode, set this switch to
OFF.
t Reset Button (RESET)
Pressing this button restarts the encoder without
shutting down the power.
Press this button only when the encoder becomes
unstable.
shutting down the power.
Press this button only when the encoder becomes
unstable.