Panasonic AW-DU600 ユーザーズマニュアル

6 RS-232C CONTROL OUT connectors (P1 to P5)

These connectors are used to connect the pan-tilt head
system controlled with RS-232C.
<Note>
These connectors cannot be used in conjunction with the
RS-422 CONTROL OUT connectors 7.

7 RS-422 CONTROL OUT connectors (P1 to P5)

These connectors are used to connect the pan-tilt head
system controlled with RS-422.
<Note>
These connectors cannot be used in conjunction with the
RS-232C CONTROL OUT connectors 6.

8 TO MODEM connector

This is used to connect the modem.
Connect this connector to the RS-232C connector on the
modem using the RS-232C cable provided with the
modem.

9 TO RCB/PC connector

This is used to connect the WV-CB700A RCB (remote
control box).  When the RCB is connected, the control
signals input to the CAMERA CONTROL IN connector <
are disabled.
If the WV-CB700A is connected to the control panel (AW-
RP301, AW-RP501 or AW-RP505), operation of the IRIS
control on the control panel takes precedence.
Also, if a PC is connected when the adapter is in direct
mode, it is possible to control a pan-tilt head system.

: PAN/TILT CONTROL IN connector

This is used to connect the controller.
When an AW-RP301, AW-RP501 or AW-RP505 is being
used, connect it to the PAN/TILT CONTROL OUT
connector.

When an AW-RP605 is being used, connect it to the

EXTERNAL CONTROL OUT connector on the main unit.
<Note>

An AW-RP605 cannot be used for control in direct mode.

; Control panel selector switch

This is switched according to the control panel
connected.
A: AW-RP605
B: AW-RP301,AW-RP501,AW-RP505, and WV-CB700A

< CAMERA CONTROL IN connector

When an AW-RP501 or AW-RP505 is being used as the
controller, connect it to the CAMERA CONTROL OUT
connector on the control panel.

= GND connector

This is connected to the GND earth to prevent
malfunction caused by external noise.

> DC 12V IN connector

This is the power input connector and is used to connect
the AW-PS301.

? Cable clamp

This is provided for the AW-PS301 cable to prevent the
cable from being pulled out.

$

6

8

9

7

: ;

<

=

>
?